XP-1 DRIVER – SPEC
FACE MATERIAL / PROCESS | Ti6-4+Carbon(ET40) | ||||
HEAD MATERIAL / PROCESS | Casting | ||||
LOFT (deg.) | 9.5 | 10.5 | |||
LIE (deg.) | 59.5 | ||||
VOLUME (cc) | 460 | ||||
LENGTH (inch) | 45.25″ | ||||
SWING WEIGHT / GROSS WEIGHT (g) | VIZARD 43 R | D1・285 | D1・285 | ||
VIZARD 43 SR | D1・290 | D1・290 |
XP-1 DRIVER – SHAFT
WOOD | KICK-POINT | BUTT DIAMETER (mm) | TIP DIAMETER (mm) | FLEX | LENGTH(mm) | WEIGHT (g) | TORQUE (deg.) |
VIZARD 43 | Low Mid | 15.3 | 8.6 | R | 1,135 | 42.5 | 6.8 |
15.3 | SR | 44.5 | 6.65 |
XP-1 DRIVER – Grip
NAME | HONMA Rubber A61 BK/WH | |
MATERIAL | Rubber | |
WEIGHT (g) | 44 | |
SIZE | A61 |

Double slot
• Increased initial velocity across the entire face
• High launch & ideal spin
• Gear-effect supportsystem for toe and heel

ET40 Carbon crown for XP-1
The lower center of gravity increases the launch angle while also improving responsiveness in the crown. The expert design of the XP-1 transmits deflection to the ball instantly and effectively.

5 FANG Technology
Ribs resembling fangs are placed in 5 locations on the face and the upper perimeter. Increasing the rigidity of the face perimeter achieves greater repulsion over a wider area and increased initial velocity.

DRAW BIAS (Internal centre of gravity design)
The internal weighting is designed to promote easy, straight distance for slower swingers through a draw-biased center of gravity placement.

NON-ROTATING SYSTEM
The included torque wrench makes it possible to continuously adjust the lie, loft, or face angle without removing or rotating the shaft. This is Honma’s own unique and innovative adjustment

P-SAT Precision spine control
The spine is set at six o’clock on all clubs to stabilize shaft movement and to keep the integrity of the entire set
Reviews
There are no reviews yet.